Depending on the needs, CEAYA electric bikes are equipped with different throttles for different bikes, such as grip throttle/handlebar throttle (for ebike R5PRO, RX80), thumb throttle/finger throttle (for ebike AZ26, ebike A20, ebike R8SE).
The advantage of the throttle function is that it allows you to use the ebike more easily, but of course, it will also increase the power consumption, which will reduce the range of the ebike. And, incorrect use of the throttle function may cause your ebike motor to malfunction.
Therefore, we have summarised the precautions and tips about using ebike throttle for you:
1. Throttle is only suitable for gentle road conditions.
2. Do not use the throttle on downhill roads (because it may be too fast and cause safety hazards, especially for newbies, this is a very important issue).
3.Throttle can't be used directly to drive ebike to climb uphill, you can use PAS level 1-5 to drive ebike after activation, but please don't use throttle function to go uphill directly, because it is an e-bike after all, not an e-motorbike, the motor power is limited, using throttle function to go uphill will lead to the motor overloading, which will cause malfunctioning, such as damage to the motor, motor rattling, and so on. So you can match the combination of throttle and pedal drive ebike to go uphill.
4. If your ebike is used for daily commuting, please comply with the road regulations in your location. For areas where the throttle function is not allowed, please remove/ or do not install the throttle function, and purchase an ebike that meets the requirements, such as the eBIKE R8SE.
5. If you don't need the throttle function, then just use ebike normally.
6. If you need to use the throttle function, you can keep/optionally install the throttle function (CEAYA ebike optional throttle function is very simple, directly assemble the throttle to the handlebar and connect it to the controller); when you successfully configure the throttle function, you can start to enjoy the joy of pure electric mode.
7. Sharing through experience: When you are going uphill, we recommend you to set the instrument PAS level to 3-5 and the handlebar shifter to 1-3 when you use PAS mode. This way you will have an easy riding experience!
Also, please note that you should not use the shifter in a parked state, as the chain pivot will not work properly in a stationary state and this will damage the chain pivot and sprocket, leading to problems with the chain falling off or not being able to shift in the future when you use the shifter.
Above is this sharing about using electric bike throttle function, if you want to know more tips about using ebike, you are welcome to tell us through the comment section or follow our Youtube channel:CEAYA Electric Bikes
